Главная

•

Fujitsu

•

Опции к серверам

•

Модули и контроллеры

Сетевой адаптер Fujitsu 2x10GB S26361-F3640-L502 в Балашихе

Vendor Code	S26361-F3640-L502

Order code	S26361-F3640-L502
Product Name	PLAN EP X710-DA2 2x10G SFP+
Height of bracket	Full Height / Low Profile
Number of ports	2
Related product	PRIMERGY Server
Technical details
Controller Silicon	Intel® X710 10 Gigabit Ethernet Controller
Controller type	Ethernet Ctrl.
Connector type	SFP+
Data transfer rate(s)	1 Gbit/s; 10 Gbit/s
Auto Negotiation support	Yes
Bus interface	PCIe 3.0 x8
Bus transfer rate	8GT/s
LEDs	LINK (solid) and ACTIVITY (blinking) LINK SPEED (green = 10Gbps; yellow = 1Gbps)
Network protocol and standards compatibility	IPv4, IPv6 and mixed IPv4/IPv6 network protocols IEEE 802.1p Class of Service IEEE 802.1q VLAN IEEE 802.1Qaz Enhanced Transmission Selection (ETS) IEEE 802.3ae 10Gbit Ethernet IEEE 802.3x Flow Control IEEE 802.1as Timing and Synchronization IEEE 1588 Precision Time Protocol IEEE 802.3az Energy Efficient Ethernet (EEE) SFF 8431 SFP+
Interrupt Levels	MSI-X; INTA; MSI
Virtualization	Server Virtualization - VMDq (up to 256 maximum VMDq VMs supported) - SR-IOV ready (64 virtual function per port) - VEPA: IEEE 802.1Qbg support for Virtual Ethernet Port Aggregator Network Virtualization - VXLAN, NVGRE, GENEVE - VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags
Teaming	by OS driver
Remote boot support	PXE 2.0
iSCSI support	Yes
Offloading	- TCP Stateless Offloads (include checksum, TSO, VMDq and RSS) - TX/RX IP, SCTP, TCP & UDP checksum offload (IPv4, IPv6) capabilities- iSCSI Host Initiator - Flow Classification (Trafficking data flows across multiple consumers and connections)
Data transfer rate up to	10 Gbit/s
Interface Module notes	Only Fujitsu certified modules and cables are supported Order codes starting with “S26361-F3873” are Brocade branded cables, required for connections to Brocade switches
Description optional cable	10Gbit/s transceiver module for MMF (S26361-F3986-E3 / -L3 and MC-0JXE51 / MCX0JXE51): - OM1 (Multi Mode Fiber 62.5/125?m, 200 MHzkm) up to 33m- OM2 (Multi Mode Fiber 50.0/125?m, 500 MHzkm) up to 82m - OM3 (Multi Mode Fiber 50.0/125?m, 2000 MHzkm) up to 300m - OM4 (Multi Mode Fiber 50.0/125?m, 4700 MHzkm) up to 400m10Gbit/s transceiver module for SMF (S26361-F3986-E4 / -L4): - OS1 (Single Mode Fiber 9?m) up to 10km
Environment
Power consumption	Dual Port 10GBase-SR typ. 4.3 W, max. 4.8 W Dual Port 10GBase-LR typ. 4.5 W, max. 5.1 W Dual Port SFP+ Twinax typ. 3.3 W, max. 3.7 W
Temperature (operating)	0 - 55 °C
Storage temperature	-40 - 70 °C

Order code

S26361-F3640-L502

Product Name

PLAN EP X710-DA2 2x10G SFP+

Height of bracket

Full Height / Low Profile

Number of ports

Related product

PRIMERGY Server

Technical details

Controller Silicon

Intel® X710 10 Gigabit Ethernet Controller

Controller type

Ethernet Ctrl.

Connector type

SFP+

Data transfer rate(s)

1 Gbit/s; 10 Gbit/s

Auto Negotiation support

Yes

Bus interface

PCIe 3.0 x8

Bus transfer rate

8GT/s

LEDs

LINK (solid) and ACTIVITY (blinking) LINK SPEED (green = 10Gbps; yellow = 1Gbps)

Network protocol and standards compatibility

IPv4, IPv6 and mixed IPv4/IPv6 network protocols
IEEE 802.1p Class of Service
IEEE 802.1q VLAN
IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
IEEE 802.3ae 10Gbit Ethernet
IEEE 802.3x Flow Control
IEEE 802.1as Timing and Synchronization
IEEE 1588 Precision Time Protocol
IEEE 802.3az Energy Efficient Ethernet (EEE) SFF 8431 SFP+

Interrupt Levels

MSI-X; INTA; MSI

Virtualization

Server Virtualization
- VMDq (up to 256 maximum VMDq VMs supported)
- SR-IOV ready (64 virtual function per port)
- VEPA: IEEE 802.1Qbg support for Virtual Ethernet Port Aggregator
Network Virtualization
- VXLAN, NVGRE, GENEVE
- VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags

Teaming

by OS driver

Remote boot support

PXE 2.0

iSCSI support

Yes

Offloading

- TCP Stateless Offloads (include checksum, TSO, VMDq and RSS)
- TX/RX IP, SCTP, TCP & UDP checksum offload (IPv4, IPv6) capabilities- iSCSI Host Initiator
- Flow Classification (Trafficking data flows across multiple consumers and connections)

Data transfer rate up to

10 Gbit/s

Interface Module notes

Only Fujitsu certified modules and cables are supported
Order codes starting with “S26361-F3873” are Brocade branded cables, required for connections to Brocade switches

Description optional cable

10Gbit/s transceiver module for MMF (S26361-F3986-E3 / -L3 and MC-0JXE51 / MCX0JXE51):
- OM1 (Multi Mode Fiber 62.5/125?m, 200 MHz*km) up to 33m- OM2 (Multi Mode Fiber 50.0/125?m, 500 MHz*km) up to 82m
- OM3 (Multi Mode Fiber 50.0/125?m, 2000 MHz*km) up to 300m
- OM4 (Multi Mode Fiber 50.0/125?m, 4700 MHz*km) up to 400m10Gbit/s transceiver module for SMF (S26361-F3986-E4 / -L4): - OS1 (Single Mode Fiber 9?m) up to 10km

Environment

Power consumption

Dual Port 10GBase-SR typ. 4.3 W, max. 4.8 W Dual Port 10GBase-LR typ. 4.5 W, max. 5.1 W
Dual Port SFP+ Twinax typ. 3.3 W, max. 3.7 W

Temperature (operating)

0 - 55 °C

Storage temperature

-40 - 70 °C